Guitar | Shrumatica Guitar Guide

Jan 05 2012

Xlr Female

Posted by admin in Guitar

Tags: xlr female, xlr female to 1 4 male, xlr female to 3.5mm male, xlr female to rca male, xlr female to xlr female cable | Add comment

Xlr Female

Audio and video connector by mingming

Audio Only

Audio connectors are electrical connectors designed and used for audio frequencies. They can be analogue or digital. Common audio connectors include:

Single-conductor connectors:

Banana connectors

Five-way binding posts and banana plugs for loudspeakers

Fahnestock clips on early breadboard radio receivers.

Multi-conductor connectors:

DB25 is for multi-track recording and other multi-channel audio, analog or digital

DIN connectors and mini-DIN connectors

RCA connectors, also known as phono connectors or phono plugs, used for analog or digital audio or analog video

Speakon connectors by Neutrik for loudspeakers

TRS connector also known as tip-ring-sleeve plug, phone plug, jack plug, mini-jack, and mini-stereo. This includes the original 6.35mm (quarter inch) jack and the more recent 3.5mm (miniature or 1/8th inch) and 2.5mm (subminiature) jacks, both mono and stereo (balanced) versions.

XLR connectors, also known as Cannon plugs, used for analog or digital balanced audio with a balanced line

Digital audio interfaces and interconnects:

ADAT interface (DB25)

AES/EBU interface, normally with XLR connector

S/PDIF, either over electrical coaxial cable (with RCA jacks) or optical fiber (TOSLINK).

Colour codes

white RCA/TS

analogue audio, left channel;

also mono (RCA/TS), stereo (TRS only),

or undefined/other

black RCA/TS/TRS

grey RCA/TS/TRS

red RCA/TS

analogue audio, right channel

orange RCA

SPDIF digital audio

For computers:

green TRS 3.5mm

stereo output, front channels

black TRS 3.5mm

stereo output, rear channels

grey TRS 3.5mm

stereo output, side channels

gold TRS 3.5mm

dual output, center and subwoofer

blue TRS 3.5mm

stereo input, line level

pink TS 3.5mm

mono microphone input

There are exceptions to the above:

Hosa cables use grey and orange for left and right analogue channels.

RadioShack cables sometimes use grey and black for left and right.

Older sound cards had non-standard colour codes until after PC99, prior to that there were no colours at all.

Video Only

Main article: List of video connectors

A VGA connector

Video connectors carry only video signals. Common video-only connectors include:

Component video aka YPbPr (3 RCA or BNC; or D-Terminal)

Composite video (1 RCA, Antenna socket, or BNC)

DB13W3 (“13W3″ computer video connector)

DMS-59, single connector carrying two DVI and two VGA

Musa, British connector used in broadcasting and telecommunications

PAL connector, formerly common in Europe

S-Video (1 Mini-DIN)

SDI – Broadcast grade digital interface over BNC cables

VGA connector A type of D-sub connector standard on most video cards

Mini-VGA Found on some laptop computers

5 BNC Connectors can also be used to carry the VGA signal as R, G, B, HSync, VSync

Digital Visual Interface (DVI) A hybrid analog/digital connector commonly found on PC graphics cards and LCD monitors

Mini-DVI Found on some Apple laptops

Enhanced Graphics Adapter (EGA)

RGBI interface

RGB interface

Colour codes

yellow RCA/BNC

composite video

red RCA/BNC

red or Pr/Cr chrominance

green RCA/BNC

green or luminance

blue RCA/BNC

blue or Pb/Cb chrominance

white BNC

horizontal sync

black BNC

vertical sync

Newer connectors are identified by their shape and not their colour.

Multiple signals

Some connectors can carry both audio and video signals simultaneously:

HDMI is a new digital standard

Digital Media Port a connector proposed by Sony on its audio/video products

DisplayPort digital connector

Unified Display Interface (UDI)

F connectors are used with RF modulators for televisions without direct inputs

SCART, now the most common in Europe

TRS connectors with more than one ring, or Sony’s hybrid RCA with a TRS pin

Coaxial cable/RG-6/RG-59/Cable television (CATV)

Other composite connectors carry video, power, and USB:

ADC, now-defunct Apple Display Connector

About the Author

I am a professional editor from Hardware Wholesale,
and my work i
Top Secret Soldering- XLR Female to Star Quad!

HOSA DIGITAL MULTI-TRACK SNAKES COMPATIBLE WITH TASCAM DA-88 AND FOSTEX RD-8;

$32.99

Analog Breakout SnakeUnlike the Alesis format which uses one snake for both ins and outs, Tascam and Fostex digital multitracks employ a 25-pin D-Sub connector, and therefore require two snakes; one for the inputs and one for the outputs…..

New Pyle PPSN821 8 Channel Snake Cable XLR Male XLR Female 20ft Excellent Performance High Quality

$62.36

…

MONSTER 607121 MONSTER DJ CABLES, 4-M PAIR XLR MALE TO XLR FEMALE

$38.82

MONSTER 607121 MONSTER DJ CABLES, 4-M PAIR XLR MALE TO XLR FEMALE4-M PAIR XLR MALE TO XLR FEMALE 100% FOIL SHIELD REJECTS INTERFERENCE BALANCED AUDIO INTERCONNECT CABLE WITH HIGH QUALITY COPPER STRANDINGS DUAL CABLE, WEBBED DESIGN CONSTRUCTION FOR CONVENIENT HOOKUP OF LEFT & RIGHT CHANNELS 8 DIFFERENT TERMINATION OPTIONS TO COMPLEMENT THE NEEDS OF DJ & PROFESSIONAL AUDIO SETUPS HEAVY DUTY MOLDED C…

West Bend Housewares Llc Wht Elec Timer/Clock 40055 Timers Kitchen

$13.26

White, Electronic Timer With Clock, Feature With Jumbo LCD Display, Counts Up To & From 100 Hours, Memory Recalls Previous Time Setting, Loud Electronic Alarm Signals When Time Has Elapsed & Sounds For 60 Seconds, Continuous Running Clock, Displays Hours, Minutes & Seconds In AM/PM Mode, Clips To Pocket, Stands Or Magnetically Attaches To Metal, Uses 1 ‘AAA’ Battery Included….

Leviton N1616-D00 16 Channel Programmable Console, 16 Patterns, 16 Flash, NSI Micro-Plex, DMX Installed

$546.77

3 Used NSI MC 1616 available for sale. All are in good working condition and tested….

Leviton NPC2D-FF 2 Port NPC with 2 5-Pin Female XLRS

$471.67

…

Women’s Wrestling DVD – Hurt Him – LSP-PP27 – featuring Lindy, Fred and Bill

$21.95

Hurt Him – featuring Lindy, Fred and Bill Perhaps a more apt title would be: “Can a 123 lb. female bodybuilder (in top contest shape) force a 200 lb. submit? Bill, already half crippled by her previously, teaches Lindy to execute the most wicked possible holds with maximum force against his buddy Fred. If you are one who disbelieves that any smaller female can gain true submissions from a tough st…

USB 2.0 4-CHANNEL Audio/midi

$109.85

Updated with better audio specs and a fresh new look, the four-channel Tascam US-144mkII USB audio interface is the ideal companion to any desktop- or laptop-based digital recording set-up And because it operates only on USB power, you can use it with a laptop while on the go to create a very compact and portable digital audio workstation system. The four-channel Tascam US-144mkII USB audio int…

Monster AI STUDIOLINK iStudioLink 1/4-Inch Mono Female to 1/8-Inch Stereo Male Instrument Interconnect Cable

$14.33

Monster Cable Cable iStudioLink Audio Extension Cable AI STUDIOLINK Cables…

M-Audio Delta 1010-LT PCI Digital Audio System (PC & Mac)

$197.50

M-Audio Delta 1010LT Sound Card US41077 Sound Cards…

XLR Female to XLR Male Adapter

$5.14

XLR Female to XLR Male Adapter HOSA AUDIO ADAPTER XLR

Neutrik: Female XLR Connector

$9.99

Neutrik: Female XLR Connector

RCA Female to XLR Female

$10

RCA Female to XLR Female. XLR PIN-2 goes to the center contact of the RCA, this carries the signal. XLR PINs-1 and 3 are tied together and carry the Ground via the Chassis. This connects to the Surround of the RCA.

Pylo / XLR MALE – FEMALE / PPFMXLR15

$20.48

Pylo – XLR MALE – FEMALE – PPFMXLR15

Xlr Male – Female(Pack of 1)

$18.73

Xlr Male – Female. Pyle Pro Ppfmxlr15 Xlr Microphone Cable, 15 Ft (Xlr Male To Xlr Female). Specs: 15 Ft; Xlr Male To Xlr Female. Warranty: One Year.

PylePro PPFMXLR15 15ft. XLR Male to XLR Female Microphone Cable

$23.66

15ft. XLR Male to XLR Female Microphone Cable

Steren 251-310 Female XLR Jack to Female XLR Jack Adapter

$2.84

Steren 251-310 Female XLR Jack to Female XLR Jack Adapter Type: Accessories

Ppmcl30 30-ft Xlr Microphone Cable (xlr Female – Male Symmetric)

$9.29

Ppmcl30 30-ft Xlr Microphone Cable (xlr Female – Male Symmetric) 30-ft XLR female to male symmetric

PylePro PPMCL15 15ft. Symmetric Microphone Cable XLR Female to XLR Male

$21.78

15ft. Symmetric Microphone Cable XLR Female to XLR Male

PylePro PPMCL30 30ft. Symmetric Microphone Cable XLR Female to XLR Male

$24.58

30ft. Symmetric Microphone Cable XLR Female to XLR Male

Cables To Go / XLR Female Inline Connector / 40659

$13.81

Cables To Go – XLR Female Inline Connector – 40659

Hosa Technology / HOSA 3-PIN XLR FEMALE / XLF025

$15.43

Hosa Technology – HOSA 3-PIN XLR FEMALE – XLF025

Seismic Audio – XLR Female Pro Audio Coupler Adapter Converter

$5.99

Female XLR AdapterMicrophone Cable Coupler

Hosa GXX145 XLR Female to XLR Male Adapter

$17.67

This adaptor is designed to change an XLR output into an XLR input. Connector: XLR3F to Same. Gender Changer: XLR3F to same.

CXX186 18 Gauge 6 Foot XLR To XLR Female Speaker Cables

$9

Technical Pro CXX186 CXX186 18 Gauge 6 Foot XLR To XLR Female Speaker Cables

CXX1615 16 Gauge 15 Foot XLR To XLR Female Audio Cable

$9.99

Technical Pro CXX1615 CXX1615 16 Gauge 15 Foot XLR To XLR Female Audio Cable

CXX1625 16 Gauge 25 Foot XLR To XLR Female Speaker Cable

$11.99

Technical Pro CXX1625 CXX1625 16 Gauge 25 Foot XLR To XLR Female Speaker Cable

CXX1650 16 Gauge 50 Foot XLR to XLR Female Speaker Cable

$18.99

Technical Pro CXX1650 CXX1650 16 Gauge 50 Foot XLR to XLR Female Speaker Cable

CXX183 18 Gauge 3 Foot XLR To XLR Female Speaker Cable

$9

Technical Pro CXX183 CXX183 18 Gauge 3 Foot XLR To XLR Female Speaker Cable

Cables To Go 40659 XLR INLINE FEMALE CONNECTOR

$13.36

This Xlr connector is an excellent solution for making your own cables or repairing damaged cables. Connector: Xlr Female. Color: Silver.

PylePro PPSN821 20 Ft. 8 Channel XLR Male to XLR Female Snake Cable

$53.17

20 Ft. 8 Channel XLR Male to XLR Female Snake Cable

PylePro PPSN811 10 Ft. 8 Channel XLR Male to XLR Female Snake Cable

$42.22

10 Ft. 8 Channel XLR Male to XLR Female Snake Cable

Nady XC25 25apos; Male XLR to Female XLR Microphone Cable

$32.87

It s ideal for a broad range of sound reinforcement applications including vocal performance and recording. Connectors are XLR (3 pin) male to XLR (3 pin) female. XLR Microphone Cable. Allpurpose durable low noise microphone cables. XLR to XLR connectors. Length: 25 Ft. Color: Black.

Balanced XLR Male to Balanced XLR Female (5 FT)

$9.95

Audio Interconnect: Balanced XLR Male to Balanced XLR Female. Heavy-Duty cabling. The XLR-100 Series features Hosa’s own “Clamp” style XLR connectors for outstanding performance and durability, XLR-105 (5 ft.)

Balanced XLR Male to Female – 3 Feet

$12.99

Audio Interconnect: Balanced XLR Male to Balanced XLR Female. Heavy-Duty cabling. The XLR-100 Series features Hosa’s own “Clamp” style XLR connectors for outstanding performance and durability

15Ft Xlr-Xlr Mic Cable(Pack of 1)

$19.55

15Ft Xlr-Xlr Mic Cable. Pyle Pro Ppmcl15 Xlr Microphone Cable, 15 Ft (Xlr Female To Male Symmetric). Specs: 15 Ft ; Xlr Female To Male Symmetric. Warranty: One Year.

Hosa DMX106 Adapter Cable 5Pin XLR Male To 3Pin XLR Female

$20.27

This Hosa DMX 5Pin XLR Male to 3Pin XLR Female Cable is a 6 long adapter cable ideal for use with sound and lighting control boards. Shielded with durable connectors. Features:. Cable Type: DMX 5pin male to 3pin female adapter cable. Length: 6 (15 cm). Shielding: Yes. Connector 1: 5pin XLR male. Connector 2: 3pin XLR female.

Microphone Cable: XLR Male to XLR Female (3 FT)

$16.99

Microphone Cable: XLR Male to XLR Female. Hosa’s CMK Series Microphone Cables Feature Thick 20 AWG Inner Conductors and 98% Braided Shield. CMK-003 (3 ft.)

Microphone Cable: XLR Male to XLR Female (10 FT)

$19.9

Microphone Cable: XLR Male to XLR Female. Hosa’s CMK Series Microphone Cables Feature Thick 20 AWG Inner Conductors and 98% Braided Shield, CMK-010 (10 ft.)

Seismic Audio – Splitter Cable – XLR Female to Two XLR Males 1′

$14.99

These splitter XLR cables have one female xlr on one end and split into two male xlr on the other end. These come in lengths of 1 foot long. Order splitter patch cables by 2:30 CST and we will ship the same day for Free.

Driver-Free USB Male to XLR Female Microphone Cable (4M-Length)

$21.18

Driver-Free USB Male to XLR Female Microphone Cable (4M-Length)

Cables To Go / Right Angle XLR Female Inline Connector / 40661

$13.81

Cables To Go – Right Angle XLR Female Inline Connector – 40661

Cables To Go / XLR Female Panel-Mount Connector / 40663

$13.81

Cables To Go – XLR Female Panel-Mount Connector – 40663

Cables To Go / XLR Female to 6.3mm (1/4in) Male Adapter / 40667

$23.32

Cables To Go – XLR Female to 6.3mm (1/4in) Male Adapter – 40667

Cables To Go / XLR Female to 6.3mm (1/4in) Male Adapter / 40666

$19.93

Cables To Go – XLR Female to 6.3mm (1/4in) Male Adapter – 40666

Cables To Go / 6FT PRO-AUDIO XLR FEMALE TO 1/4 / 40041

$19.74

Cables To Go – 6FT PRO-AUDIO XLR FEMALE TO 1/4 – 40041

PylePro PPMJL15 15ft. Professional Microphone Cable .25 in. Male to XLR Female

$21.67

15ft. Professional Microphone Cable 1/4 Male to XLR Female

PylePro PPMJL30 30ft. Professional Microphone Cable .25 in. Male to XLR Female

$23.74

30ft. Professional Microphone Cable 1/4 Male to XLR Female

Pyle 8 Channel Snake Cable – 8 x XLR Male – 8 x XLR Female – 20ft

$39.6

Pyle 8 Channel Snake Cable – 8 x XLR Male – 8 x XLR Female – 20ft

Cables To Go / 50ft Pro-Audio XLR Male to XLR Female Cable / 40062

$39.44

Cables To Go – 50ft Pro-Audio XLR Male to XLR Female Cable – 40062

Cables To Go 40061 25ft ProAudio XLR Male to XLR Female Cable

$33.33

Use this XLR to XLR cable to connect unbalanced sources to balanced XLR inputs. This proaudio cable is made from 22 AWG twisted pair audio cable under an aluminum foil shield and 60 copper braid for maximum shielding from noise. The highly flexible 7mm PVC jacket reduces the risk of the cable kinking and damaging the conductors.Bright nickel plating on solid brass connectors resists wear from reconfiguring and moving equipment from one venue to another. Spring strain relief on the 1/4in plug and a chuck strain relief inside the XLR reduce the effects of age on the solder joints and contacts.Connector 1: XLR MaleConnector 2: XLR Female

Nady XC10 10apos; Male XLR to Female XLR Microphone Cable

$20.88

Allpurpose durable microphone cables. XLR to XLR connectors. Length: 10 Ft. Connector Number: 2. Terminal Gender: FF. Color: Black.

Hosa XLR Gender Changer

$6.99

1 x 3-pin XLR Female 2 Audio Adapter GXX-145 Hosa Hosa Technology, Inc XLR XLR Gender Changer www.hosatech.com

Hosa GXR134 XLR Female to RCA Male Adapter

$16.76

Adaptor: XLR Male to RCA Male. XLR PIN2 goes to the center contact of the RCA this carries the signal. XLR PINs1 and 3 are tied together and carry the Ground via the Chassis. This connects to the Surround of the RCA.

Neutrik NC3-FX Female XLR Connector

$3.48

The “industry standard” XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. 3 pole female cable connector with Nickel housing and silver contacts. Features & Benefits Rugged zinc diecast shell, long lasting and durable Chuck type strain relief system for secure clamping of cables Boot with rubber gland gives high protection against bending stresses Coloured rings and boots available for coding and marking UL recognized components Type: Connector Cables Features: The “industry standard” XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

Seismic Audio – Female XLR to Two Male XLR Patch Cables 1 Foot – 4 Pack

$22.99

Model #: SAY2 (Splitter Cables)One XLR Female on one endTwo XLR Males on other endPack of Four 1' Patch Cables

Seismic Audio – SAPT15 – Mini XLR Female Connector

$4.79

Buy high quality mini 3 pin xlr female connectors to replace, repair, or build your microphone cables. Free Shipping on all cable and panel mount connector parts.

Hosa Phono to XLR Adapter

$5.99

1 x 3-pin XLR Female 1 x Phono Female 2 Audio Adapter GXJ-183 Hosa Hosa Technology, Inc Phono Phono to XLR Adapter XLR www.hosatech.com

SOUND AROUND/PYLE INDUSTRIES PPMCL15 15ft. Symmetric Microphone Cable XLR Female to XLR Male

$21.78

Dimensions: 12 x 1.8 x 8.5 . Cable Length: 15 Foot. Symmetric Microphone Cable XLR Female to XLR Male. XLR Super Quality Cable.

1 Ft 1/4” Stereo Male To 1 XLR Male And XLR Female Y-Cable

$8.29

- 1Ft 1/4” Stereo Male to 1 XLR Male and XLR Female Y-Cable – Can Be Used For Mixer/Amp/Etc – Maximum Noise Isolation Using Shields – Precision Formulated Materials for Maximum Signal Transfer

1 meter (3.28 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – PAIR (2 Cables) – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$99.95

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

1 meter (3.28 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$49.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

1 meter (3.28 feet) – Better Cables Silver Serpent XLR Cable (Microphone Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Microphone Cables (XLR Male to XLR Female)

$49.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent Reference Microphone Cable cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

1/2 meter (1.56 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – PAIR (2 Cables) – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$89.95

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

1/2 meter (1.56 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$44.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

10 Foot XLR 3 Pin Female To 1/4 Stereo Microphone / Instrument Cable

$5.39

Use this cable to connect any XLR male connector into a 1/4 inch (6.3mm) stereo female connector or to connect a 1/4 inch stereo female connector into a XLR male connector.

10 Foot XLR 3 Pin Male / Female Microphone Cable

$6.89

Stanard XLR 3 pin male to female cable. Use to connect any two devices that have XLR connectors or to extend a male / male XLR cable.

10 Foot XLR Male 3 Pin To 1/4 Mono Microphone Cable

$5.39

Use this cable to connect any XLR female connector to any 1/4 inch (6.3mm) mono female connector or to connect any 1/4 mono female connector to a XLR female connector.

10 PCS Home use 20′ Foot XLR Professional Female To Male Microphone MIC Cable

$66.99

This 20-foot,male to XLR female speaker/mic cable was designed with the professional in mind. Our cables deliver premium performance without noise, static, or buzzing. Mic cables are durable flexible with PVC jacket and come with a one-year warranty.

10 PCS Home use 20′ Foot XLR Professional Female To Male Microphone MIC Cable

$63.99

This 20-foot,male to XLR female speaker/mic cable was designed with the professional in mind. Our cables deliver premium performance without noise, static, or buzzing. Mic cables are durable flexible with PVC jacket and come with a one-year warranty.

10 PCS Home use 20′ Foot XLR Professional Female To Male Microphone MIC Cable

$64.99

This 20-foot,male to XLR female speaker/mic cable was designed with the professional in mind. Our cables deliver premium performance without noise, static, or buzzing. Mic cables are durable flexible with PVC jacket and come with a one-year warranty.

10 Pack 20 FOOT New professional XLR female to male Microphone MIC Cables – 3 PIN

$69.61

The is a 20 foot mic cable that’s built to last and priced to save you big money! The cable with high quality XLR male and female connectors. It’s compatible with any XLR connection-microphones, mixers, recorders… or anywhere else you need a high quality XLR connection. Flexible with PVC jacket.

10 meter (32.8 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – PAIR (2 Cables) – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$279.95

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

10 meter (32.8 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$139.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

10 meter (32.8 feet) – Better Cables Silver Serpent XLR Cable (Microphone Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Microphone Cables (XLR Male to XLR Female)

$139.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent Reference Microphone Cable cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

100 Foot XLR 3 Pin Male / Female Microphone Cable

$21.89

Stanard XLR 3 pin male to female cable. Use to connect any two devices that have XLR connectors or to extend a male / male XLR cable.

12 Foot XLR 3 Pin Male To RCA Male Cable

$6.99

Use this cable to connect any device with a 3 pin XLR female connector to a RCA female connector or vice versa.

12 Gauge 1Ft RCA Male To 3-Pin XLR Female Audio Cable

$7.82

- to connect unbalanced Sources to Balanced XLR inputs – 12Gauge Cable – Maximum Noise Isolation Using Shields – Precision Formulated Materials for Maximum Signal Transfer

12 meter (39.36 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – PAIR (2 Cables) – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$319.95

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

12 meter (39.36 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$159.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

12 meter (39.36 feet) – Better Cables Silver Serpent XLR Cable (Microphone Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Microphone Cables (XLR Male to XLR Female)

$159.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent Reference Microphone Cable cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

15 Foot XLR 3 Pin Female To 1/4 Mono Microphone / Instrument Cable

$6.19

Use this cable to connect any XLR male connector into a 1/4 inch (6.3mm) mono female connector or to connect a 1/4 inch mono female connector into a XLR male connector.

15 Foot XLR 3 Pin Female To 1/4 Stereo Microphone / Instrument Cable

$7.09

Use this cable to connect any XLR male connector into a 1/4 inch (6.3mm) stereo female connector or to connect a 1/4 inch stereo female connector into a XLR male connector.

15 Foot XLR 3 Pin Male / Female Microphone Cable

$7.59

Stanard XLR 3 pin male to female cable. Use to connect any two devices that have XLR connectors or to extend a male / male XLR cable.

15 meter (49.2 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – PAIR (2 Cables) – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$379.95

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

15 meter (49.2 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$189.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

15 meter (49.2 feet) – Better Cables Silver Serpent XLR Cable (Microphone Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Microphone Cables (XLR Male to XLR Female)

$189.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent Reference Microphone Cable cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

2 Channel Mini Mixer With USB Interface – PAD10

$44.13

* Combo Input Connector Female/XLR And ” Phone Jack For MIC/Line Inputs.* Line 3/2 Stereo Line Inputs RCA Plugs,To Connect Cd, Mp3 Tape Deck, Players.* Main Out RCA Plugs To Connect The Mixer, Receiver Or Amplifier.* Signal Output Thru The Headphones* Line/INSTR SW Input Select Switch Set * Line 2/3 Level This Control Adjusts The Volume Of Signal Input Of Line 2/3.* Peak Led It Lights Up Went The Input Signal Of Ch1 Is Too High.* Ch 1 Gain This Control Adjust The Volume Of Signal Input Of Ch1.* Phantom Power Supply On The XLR Connector Of Ch1.* Phantom Led Indicates That Phantom Power Is On.* USB Audio Interface* Master Lets You Control Mixers Overall Volume Level * Clip Led Lights Up Went The Main Output Signal Is Too High* Monitor To Control Volume Output Of The Monitor Jack.* Power Led Indicates That The Unit Is In On Position.

2 PCS Home use 20′ Foot XLR Professional Female To Male Microphone MIC Cable

$10.99

This 20-foot,male to XLR female speaker/mic cable was designed with the professional in mind. Our cables deliver premium performance without noise, static, or buzzing. Mic cables are durable flexible with PVC jacket and come with a one-year warranty.

2 PCS Studio 20′ FOOT XLR FEMALE TO MALE Professional Microphone CABLE

$9.99

This 20-foot,male to XLR female speaker/mic cable was designed with the professional in mind. Our cables deliver premium performance without noise, static, or buzzing. Mic cables are durable flexible with PVC jacket and come with a one-year warranty.

2 meter (6.56 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – PAIR (2 Cables) – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$119.95

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

2 meter (6.56 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$59.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

2 meter (6.56 feet) – Better Cables Silver Serpent XLR Cable (Microphone Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Microphone Cables (XLR Male to XLR Female)

$59.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent Reference Microphone Cable cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

25 Foot XLR 3 Pin Female To 1/4 Mono Microphone / Instrument Cable

$9.69

Use this cable to connect any XLR male connector into a 1/4 inch (6.3mm) mono female connector or to connect a 1/4 inch mono female connector into a XLR male connector.

25 Foot XLR 3 Pin Female To 1/4 Stereo Microphone / Instrument Cable

$10.09

Use this cable to connect any XLR male connector into a 1/4 inch (6.3mm) stereo female connector or to connect a 1/4 inch stereo female connector into a XLR male connector.

25 Foot XLR 3 Pin Female To RCA Male Cable

$8.59

Use this cable to connect any XLR male connector to a RCA female connector or to connect any RCA female connector to a XLR male connector.

25 Foot XLR 3 Pin Male / Female Microphone Cable

$10.59

Stanard XLR 3 pin male to female cable. Use to connect any two devices that have XLR connectors or to extend a male / male XLR cable.

25 Foot XLR Male 3 Pin To 1/4 Mono Microphone Cable

$9.69

Use this cable to connect any XLR female connector to any 1/4 inch (6.3mm) mono female connector or to connect any 1/4 mono female connector to a XLR female connector.

3 PCS Home use 20′ Foot XLR Professional Female To Male Microphone MIC Cable

$13.99

This 20-foot,male to XLR female speaker/mic cable was designed with the professional in mind. Our cables deliver premium performance without noise, static, or buzzing. Mic cables are durable flexible with PVC jacket and come with a one-year warranty.

3 PCS Studio 20′ FOOT XLR FEMALE TO MALE Professional Microphone CABLE

$12.99

This 20-foot,male to XLR female speaker/mic cable was designed with the professional in mind. Our cables deliver premium performance without noise, static, or buzzing. Mic cables are durable flexible with PVC jacket and come with a one-year warranty.

3 meter (9.84 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – PAIR (2 Cables) – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$139.95

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

3 meter (9.84 feet) – Better Cables Silver Serpent XLR Cable (Balanced Audio Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Balanced Audio Cables (XLR Male to XLR Female)

$69.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent II XLR cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

3 meter (9.84 feet) – Better Cables Silver Serpent XLR Cable (Microphone Cable) – Single Cable – High-End, High-Performance, Silver/Copper Hybrid, Low-Capacitance, Audiophile XLR Microphone Cables (XLR Male to XLR Female)

$69.98

Silky-smooth audio using our advanced precision conductors and industry-low capacitance measurements. This audio cable is a dual conductor, twisted pair configuration. It features 99.999% pure silver coated conductors. Balanced lines are the preferred method (for hum free) interconnecting of sound systems using a shielded twisted-pair. The principal behind balanced lines is that the signal is transmitted over one wire and received back on another wire. The shield does not carry any information, thus it is free to function as a true shield. This circuit’s shining virtue is its great common-mode noise rejection ability. The concept here relies on induced noise showing up equally (or common) on each wire. It is mainly due to EMI (electromagnetic interference: passing through or near magnetic fields), RFI (radio frequency interference: strong broadcast signals), noisy ground references, or a combination of all three. Our Silver Serpent Reference Microphone Cable cables exhibit exactly equal impedance from each line relative to ground, guaranteeing equal noise susceptibility. Since the balanced input stage amplifies only the difference between the lines, it rejects everything else (noise) that is common to the lines.

3 pcs 3 ft Foot Color XLR 3 Pin Male to Female Mic Microphone Cables Cords

$8.09

This 3-foot,male to XLR female speaker/mic cable was designed with the professional in mind. Our cables deliver premium performance without noise, static, or buzzing. Mic cables are durable flexible with PVC jacket and come with a one-year warranty.

3M USB 2.0 Microphone MIC Link Cable Build-in Sound Card – XLR Female To USB Male – Plug & Play

$9.49

This USB Microphone cable in itself owns sound card and can be compatible with computer without addtional driver, just plug in your instruments or microphones, electronic organ and so on, then you can start recording high quality digital music works easily. Supports USB 2.0/1.1. Plug and play, no driver installation required, unit is identified automatically. Embedded A/D convert with audio signal boost. Power supply via USB interface, with USB connection LED indicator. High quality professional shielded cable and Cannon XLR- Female plug. 16bit 48/44.1 kHz digital quality sound input.

3ft Premier Series XLR Female to 1/4inch TRS Male 16AWG Cable (Gold Plated)

$11.67

Audio cables brings you high performance cables at rock bottom prices. Whether youre connecting broadcast equipment, instruments for your band or your high end entertainment system, Monoprice has the interconnect cables for you. Balanced audio cables utilize impedance balanced lines that reduce EM and RF noise and extend the effective range of the cable run. Additionally, unlike standard unbalanced RCA interconnects that utilizes their braid as a signal return, balanced cables have a separate braided shield to provide additional resistance to interference without modulating the interference into the signal. This prevents ground loop issues.

4 PCS Home use 20′ Foot XLR Professional Female To Male Microphone MIC Cable

$21.99

This 20-foot,male to XLR female speaker/mic cable was designed with the professional in mind. Our cables deliver premium performance without noise, static, or buzzing. Mic cables are durable flexible with PVC jacket and come with a one-year warranty.

4-pin XLR Male to 4-pin XLR Female Power Cable – 10 ft

$31.99

CH1058: These cables are the equivalent to Sony KD for use as a power cable from video cameras to AC adapters. Comprehensive offers a lifetime warranty on all products

4-pin XLR Male to 4-pin XLR Female Power Cable – 17 ft

$38.39

CH1058: These cables are the equivalent to Sony KD for use as a power cable from video cameras to AC adapters. Comprehensive offers a lifetime warranty on all products

Shrumatica Guitar Guide

Xlr Female

Audio and video connector by mingming

About the Author

Recent Posts

Tags